4/6 Reflector PLL-DLR

Stuff for Nerds

That Pedal Show made me do it

tuner wah fuzz fuzz fuzz octave comp boost eq distortion distortion distortion overdrive overdrive overdrive chorus flanger phaser delay

That Pedal Show

Sequence:
01. Peterson Stomp Classic Strobe Tuner
02. Morley – M2 Wah
03. MXR M173 Classic 108 Fuzz
04. Resonant Electronics Field Effects Acceleron Fuzz
05. JDM Pedals Fuzz 292
06. Electro Harmonix Pitch Fork Polyphonic Pitch Shifter + M-Audio EXP
07. Keeley X Pedals Super Bass X compressor
08. Resonant Electronics Field Effects Graviton Boost
09. Caline CP-24 10-band EQ
10. ProCo ‘Vintage Rat’ distortion
11. Zvex Double Rock distortion/boost
12. Resonant Electronics Field Effects Manifold Drive
13. Electro Harmonix – Op-Amp Big Muff Pi Distortion Sustainer
14. Electro Harmonix – Soul Food Distortion Fuzz Overdrive
15. Electro Harmonix Neo Clone analog chorus
16. Electro Harmonix Neo Mistress flanger
17. MXR – M290 Phase 95 Dual Phaser
18. LovePedal Hermida EPH-3 Tape Sim Delay
19. Boss HM-2 Heavy Metal Distortion Pedal

-Mosky – C8 Powerstation

Line 6 HX Effects

Crafted with eight capacitive footswtiches capable of running nine simultaneous effects taken from a bank of 128 presets and over 100 DSP effects from the Helix line as well as DL4, DM4, and more, the Line 6 HX Effects is one of the most accessible entryways into the world of high-grade multi-effects pedals. Almost infinitely tweakable, each individual LCD display lets users sculpt three individual parameters per effect, and for the fuzzheads in the audience, Line 6’s Transtronic technology faithfully emulates the specific characteristics of germanium and silicon transistors. An attractive, compact option for replacing an entire board.

HX Effects™ was created for guitarists and bassists who want our flagship Helix® effects for traditional amp and pedalboard setups. Powered by the same audio engine as Helix processors, HX Effects includes the full array of Helix effects plus legacy effects from the M-Series and Stompbox Modeler pedals. All in a compact pedal that fits easily on your pedalboard.

HX Effects gives you complete control when editing and crafting effects presets

Read more

PULLER PRO BL 540 STANDARD

Puller Pro BL 540 Standard 2700kv

High Power, High Torque, High Performance, Smooth Startup!
When you want efficient power in a brushless sensored motor, the Puller Pro delivers. Perfectly suited as a drop in motor for any heavy 2 or 4WD truck that uses 540 size motors, the Puller Pro 540 is more than just your regular size motor. It crams in more stator and magnet than any other “540” available to give you the excessive force you desire!

  • Features:
    Four pole 17.5mm diameter x 26mm length rotor
    Twelve slot stator
    13g phase wires with 4mm bullets installed
    Oversized bearings
    Sensored
    Waterproof sensor board
    Includes sensor wire
    Minimally vented can
  • Specs:
    Standard 540 size motor
    25mm pattern
    M3 mounting screws
    3.175mm shaft
    36mm diameter
    53mm length
    210g (7.4oz) with wires
    50,000 rpm max

ProCo Vintage RAT

Pre-2003 model in 2019

Vintage RAT 1991-2005
As the vintage instruments market surged, demand grew for a reissue of the “large box” RAT pedal. The Vintage RAT can easily be identified from an original in two ways. First, the Pro Co logo does not contain the “Sound Inc.” text written down its right side. The reissue also features an easy access battery compartment on the pedal’s bottom.

For 25 years, discerning guitarists have used the Rat’s “magic” sound, its perfect blend of distortion, sustain and cutting power, usually found only at a volume too loud for club and studio work. Painstakingly researched and designed to produce a sound that is radically different from any “fuzztone” your have ever heard — a sound that sings and wails the blues, or spits and screeches the hardest rock’n roll. A sound that is as subtle as a vintage “twin”, or as bone crushing as a wall of those famous English stacks. The Rat’s smooth harmonic distortion and effortless sustain put the extra punch in rhythm work and makes solos cut through with authority and power.

Tune in just the right amount of overdrive, get the presence you need without any tinny treble, and balance the volume for the perfect extra “kick” for lead breaks. Distortion, sustain, fuzz, overdrive: the sound remains unmistakably yours. Not fake or gimmicky. Also the rat will not change the tone or power of your guitar when it is turned off; its true bypass switch disconnects it completely from the circuit when it is not in use, eliminating the loading effects common among other devices.

The Vintage Rat is a reissue of the original production models built circa 1977. It offers fat smooth distortion with effortless sustain. It gives a Marshall feel to Fender amps and humbucker muscle to single coil pickups. There is a wonderful natural compression to the Rat. As you search for your sound, you owe it to yourself to check out the Vintage Rat at great music stores everywhere.
VRAT Suggested Resale $149.95 RPS1 (Bat elim.) Suggested Resale $16.99

TRAILMASTER SPORT 550

TrailMaster Sport 550 21t

The TrailMaster Sport is a budget motor built for messy, dirty, off road action. Whether on the rocks or in the dirt, the TrailMaster Sport is perfectly at home. Great choice for young drivers or running in the muck without ruining an expensive motor.

FEATURES:
Zero timing, universal installation and rotation direction
1/8th inch shaft diameter
36mm OD x 57mm length (not including shaft)
m3 mount holes, 25mm spacing, “540” standard
ball bearing on output
bronze bushing on end bell
High strength Y45 Ferrite magnets

To Magnetize or Demagnetize?

The Magnetizer/Demagnetizer is a useful tool that helps mechanics, electricians, and hobbyists to alternatively have magnetized or demagnetized tools. It’s important that electricians have demagnetized tools so that their tools do not magnetically attract to anything as they work on small hardware. Similarly, mechanics may need magnetized tools to attract screws and other fasteners. Rather than buying pre-magnetized tools at the hardware store, they can use this helpful magnet to magnetize or demagnetize any small steel tool already on-hand!

Simply run the tool through the “magnetize” side (open rectangle) and the steel tool will carry a temporary magnetism, allowing it to easily pick up and hang on to small screws and nails. The magnetism is not permanent and will eventually wear off, even without running it through the “demagnetize” side. This is because the steel is exposed to a magnetic field, which temporarily aligns the electrons, causing it to be magnetized. Eventually, the electrons will resume their original position.

It is sometimes necessary to switch between magnetized and demagnetized, which is where the other side of the tool comes in. Run the magnetized tool through the “demagnetize” side (indented opening) to quickly remove any magnetism. Running the magnetized tool through this end allows the previously aligned electrons to become interrupted, thus removing the magnetism.

The ease with which this product can be used lends to its appeal across multiple industries. In conjunction with its portability and functionality, it is decorated with a full color domed decal on either side. The product itself is magnetic and therefore can be placed on a toolbox, filing cabinet, or other ferrous surfaces.

The science behind magnetism is contained in this compact tool!

Source: to-magnetize-or-demagnetize-one-handy-tool-does-both

Proxxon MICRO miller MF 70

NO 27 110

1. Handwheels with zero adjustable scales, 1 revolution = 1mm, 1 division = 0.05mm.
2. Continuously variable speed from 5,000 – 20,000rpm, perfect for even the smallest milling cutter.
3. Cutter clamping in MICROMOT system collets.
4. Table of stable aluminium. Both axes are fitted with adjustable dovetail slides.
5. MICROMOT steel collets, triple slit and hardened, from 1 to 3.2mm.
6. Stable cast iron base.
7. Supplied complete with stepped clamp blocks of steel.

 

The accurate miller for delicate projects. Spindle speeds 5,000 – 20,000rpm. For work with extremely small cutters.

Stable grey-cast iron machine base, vertical guide and compound table. Free from play, readjustable dovetail gib in all axes. Die-cast aluminium arm housing, with 24-pin special motor (balanced). For vibration-free work at high speeds.

The triple slit, hardened steel MICROMOT collets cover 1, 1.5, 2, 2.4, 3, 3.2mm (1/32, 1/16, 5/64, 3/32, 7/64, 1/8inch). The table is fitted with 3 T-slots of the 12 x 6 x 5mm MICROMOT norm. An adjustable ruler scale eases the positioning of the workpiece.

Technical data:
230V, 100W, 50/60Hz. Spindle speeds 5,000 – 20,000rpm. Table 200 x 70mm with X-Y travel of 134 and 46mm respectively, with vertical travel 80mm. Footprint size 130 x 225mm and overall height 370mm. Weight approx. 7kg.

The clamping blocks depicted are included too, but not the workpiece! (nor are the 3 Tungsten milling cutters NO 27 116)