Step file edit with Fusion360
Get this file: https://www.printables.com/model/420062-raspberry-pi-mount-for-din-rail-bracket-fan-mount
Wanting to mount it however to this: https://aliexpress.com/item/1005002245769197.html
which has different mounting holes (47.5mm versus 52.5mm and, need to be for M4)
1.
01 Upload STEP File 
02 Open STEP File 
03 To be able to Redo / Undo better “Capture Design History 
04 Create Sketch 
05 Choose the “Main Plane” 
06 Create -> Project 
07 Select the same plane again 
08 Select Line tool and draw a line between the 2 existing holes 
09 Create -> Point 
10 Move mouse on the line till a little blue triangle appears – this is the middle of the line. Click to draw a point.
