Quick-clamping toolholder with double-dovetail triangular body for taking accessories.
supplied with 1 fixing bolt and one 5-mm (13/64″) internal-square key (without toolholder) Weight: .240 kg (.529 lb)
Rational shape permitting logical positioning of the tool and ensuring unimpeded visibility and optimum clearance when using the centre. Great ease of handling and quick tool changing without retracting the carriage. Constantly accurate positioning of the interchangeable accessories ensured by seat on three faces of the dovetail of the tool-body dovetail. Absolute tool stability achieved by locking with a cam piston and by restricting the overhang to a minimum. Provision for parallel turning with two different tool positions (90° and 30°) without moving the clamping block. The 30° position of the tool is particularly favourable for roughing work, the tool being supported along its axis. The tool holders for drilling and reaming automatically re-establish the parallel position. Adjustment of the cutting height of the tool with the aid of a self-locking screw on each tool holder, avoiding the trouble of using packing pieces. Grinding of the tools without any need to remove them from the tool holders. Possibility of pre-setting several replacement tools for machining large batches. Unlimited number of successive operations possible when machining complex parts, the number depending only on the quantity of tool holders available. Provision for using tools of standard lengths, the projecting portion at the rear of the toolholder causing no obstruction.
2-screw toolholder, length 35 mm (1 3/8″), 7.7 x 8.2-mm (19/64 x 21/64″) opening. Weight: .060 kg (.132 lb)
2-screw bar holder, length 35mm (1 3/8″), 7.7 x 8.2-mm (19/64 x 21/64″) opening with vee groove for ø8 mm. Weight: .060 kg (.132 lb)
2-screw bar holder, length 35mm (1 3/8″), 8 x 9.5-mm (5/16 x 3/8″) opening with vee groove for ø8 mm, at 30° angle. Weight: .080 kg (.176 lb)
Cutting-off toolholder, length 35 mm (1 3/8″), for 8 x 2 mm (5/16 x 5/64″) tool with double-cut profile. Weight: .60 kg (.132 lb)
“During a routine check of our servers, we detected malware in your account “mcha.nl”:
#1 SUSP_GIF_Anomalies [author=”Florian Roth (Nextron Systems)”]
#2 WEBSHELL_PHP_OBFUSC_3 [author=”Arnim Rupp (https://github.com/ruppde)”]
Important notes about this list:
The part marked with # after the file name refers by number to the matching malware signatures further down the list. Some malicious code may also have been injected into your website’s regular files. The list is not necessarily complete and also may contain false positive results.
These files appear to have been injected through the administrative backend of your WordPress installation.”