testing camera settings, filmed 2k7@30fps, 1/60, RockSteady (after 13sec of no RockSteady), D-Cinelike, 6100K, no filters. Holmes Hobbies Puller Pro brushless motors (2700Kv and 3500Kv)
In the Blue corner, as original as I could keep it (HH 2700Kv Puller Pro) 15T pinion, 2.2 alu beadlocks with Louise Champ tires and Double Deuce foams.
In the Red Corner, as unoriginal as I could with RC4WD AX-2 speed with 20T pinion 52T Spur, HH 3500Kv Puller Pro, TRX-4 axles and lots of brass (links etc), overdrive in front, SpareTimeHobbies Skid, 2.2 alu beadlocks with snipped TRX-4 Canyon Trail tires and Double Deuce foams
Both running Gens-Ace 3S 11.4V 3600mAh battery and Mamba X and JX steering servo and TRX-4 90mm shocks and MIP #18250 TRX-4 driveshafts and Spektrum SR515 receivers.
High Power, High Torque, High Performance, Smooth Startup!
When you want efficient power in a brushless sensored motor, the Puller Pro delivers. Perfectly suited as a drop in motor for any heavy 2 or 4WD truck that uses 540 size motors, the Puller Pro 540 is more than just your regular size motor. It crams in more stator and magnet than any other “540” available to give you the excessive force you desire!
Four pole 17.5mm diameter x 26mm length rotor
Twelve slot stator
13g phase wires with 4mm bullets installed
Waterproof sensor board
Includes sensor wire
Minimally vented can
Standard 540 size motor
M3 mounting screws
210g (7.4oz) with wires
50,000 rpm max
The TrailMaster Sport is a budget motor built for messy, dirty, off road action. Whether on the rocks or in the dirt, the TrailMaster Sport is perfectly at home. Great choice for young drivers or running in the muck without ruining an expensive motor.
Zero timing, universal installation and rotation direction
1/8th inch shaft diameter
36mm OD x 57mm length (not including shaft)
m3 mount holes, 25mm spacing, “540” standard
ball bearing on output
bronze bushing on end bell
High strength Y45 Ferrite magnets