Prusa Mini Bear +

I made an overview of all mods done to my Prusa Mini + ?
With lots of thanks to so many different people on Thingiverse and Printables

Prusa Mini+, mellow V6 alu cold block/heatsink, mellow brass heater block, mellow silicon heater block sock, E3D v6 Titanium heatbreak 1,75 mm (origineel), Bondtech CHT 0.4mm nozzle, LDO Orbiter 1.5 extruder, Weishuo 24V-10A-240W PSU, Raspberry Pi 3a, Argon1 FanHat, Raspberry Pi PSU 5.1V 2.5A MicroUSB, Prusa Stepper motor Z-axis, Misumi Linear bearings kit + superlube, AluX Bear mini 2040 extrusions, GT2x6 mm Kevlar-reinforced timing belt (2,5 meter), USB-USB-c kabel, wiring + plugs, printed parts, High Power MOSFET 30A, fans, PrintBay Heat bed insulation, buck converter

18 September 2022
Freedom
3D printing, AluX, Bondtech, brass, buck converter, CHT, E3D, GT2, Kevlar, LDO, Mellow, Misumi, Mosfet, Orbiter, PrintBay, Prusa Mini+, Raspberry, Stuff for Nerds, titanium, V6, Weisho

RC4x4 DJI Osmo Action test

testing camera settings, filmed 2k7@30fps, 1/60, RockSteady (after 13sec of no RockSteady), D-Cinelike, 6100K, no filters. Holmes Hobbies Puller Pro brushless motors (2700Kv and 3500Kv)

20200417 WestDuinPark

Axial Capre RockGardens Scheveningen

Axial Capre (ie 2 Capri)

In the Blue corner, as original as I could keep it (HH 2700Kv Puller Pro) 15T pinion, 2.2 alu beadlocks with Louise Champ tires and Double Deuce foams.

In the Red Corner, as unoriginal as I could with RC4WD AX-2 speed with 20T pinion 52T Spur, HH 3500Kv Puller Pro, TRX-4 axles and lots of brass (links etc), overdrive in front, SpareTimeHobbies Skid, 2.2 alu beadlocks with snipped TRX-4 Canyon Trail tires and Double Deuce foams

Both running Gens-Ace 3S 11.4V 3600mAh battery and Mamba X and JX steering servo and TRX-4 90mm shocks and MIP #18250 TRX-4 driveshafts and Spektrum SR515 receivers.